LOMC

 Publication

Journal

sub_bulet 2017
238. D. Lee, Y.-W. Lim, H.-G. Im, S. Jeong, S. Ji, Y. H. Kim, G. -M, Choi, J. -U, Park, J.-Y. Lee, J. Jin and B.-S. Bae “Bioinspired Transparent Laminated Composite Film for Flexible Green Optoelectronics”, ACS Applied Materials & Interfaces, DOI: 10.1021/acsami.7b03126 (2017) PDF
237. H. Y. Kim, D.-E. Yoon, J. Jang, G.-M. Choi, D. C. Lee and B.-S. Bae “Quantum Dot/Siloxane Composite Film Exceptionally Stable Against Heat and Moisture”, SID Symposium Digest of Technical Papers, 48 451-454 (2017) PDF
236. B.-S. Bae, G.-M. Choi, Y. H. Kim, Y. H. Kim, and J.-H. Ko “Flexible Hard Coating (Flex9H®) for Foldable Display Cover Plastic Film”, SID Symposium Digest of Technical Papers, 48 215-217 (2017) PDF
235. Y.-W. Lim, H. Lee, H. Y. Kim, J. G. Bae, and B.-S. Bae ” Composition Optimization of Transparent Glass-fabric Reinforced Siloxane Hybrid (GFRHybrimer) Films for Thermally Stable Flexible Display Substrate Film”, SID Symposium Digest of Technical Papers, 48 150-152 (2017) PDF
234. J. Park+, B. G. Hyun+, B. W. An+, H.-G. Im, Y.-G. Park, J. Jang, J.-U. Park and B.-S. Bae “Flexible Transparent Conductive Films with High Performance and Reliability Using Hybrid Structures of Continuous Metal Nanofiber Networks for Flexible Optoelectronics”, ACS Applied Materials & Interfaces, DOI: 10.1021/acsami.7b04314 (2017)
+These authors contributed equally
PDF
233. H. Y. Kim, D.-E. Yoon, J. Jang, G.-M. Choi, D. C. Lee and B.-S. Bae “Heat- and Water-Proof Quantum Dot/Siloxane Composite Film: Effect of Quantum Dot-Siloxane Linkage”, Journal of the Society for Information Display, 25 108-116 (2017) PDF
232. G.-M. Choi, J. Jin, D. Shin, Y. H. Kim, J.-H. Ko, H.-G. Im, J. Jang, D. Jang, and B.-S. Bae “Flexible Hard Coating: Glass-Like Wear Resistant, Yet Plastic-Like Compliant, Transparent Protective Coating for Foldable Display”, Advanced Materials, 29 1700205 (2017) PDF
231. J.-W. Jung+, H.-G. Im+, D. Lee+, S. Yu, J.-H. Jang, K. R. Yoon, Y. H. Kim, J. B. Goodenough, J. Jin, I.-D. Kim, and B.-S.Bae “Conducting Nanopaper: A Carbon-Free Cathode Platform for Li−O2 Batteries”, ACS Energy Letters, 2 673-680 (2017)
+These authors contributed equally
PDF

sub_bulet 2016
230. H. Y. Kim, D.-E. Yoon, J. Jang, D. Lee, G.-M. Choi, J. H. Chang, J. Y. Lee, D. C. Lee, and B.-S.Bae “Quantum Dot/Siloxane Composite Film Exceptionally Stable against Oxidation under Heat and Moisture”, Journal of the American Chemical Society, 138 16478-16485 (2016) PDF
229. J.-Y. Bae, J. Jang, and B.-S.Bae “Transparent, thermally stable methyl siloxane hybrid materials using sol-gel synthesized vinyl-methyl oligosiloxane resin”, Journal of Sol-Gel Science and Technology, 82 253-260 (2016) PDF
228. Y. H. Kim+, Y.-W.Lim+, D. Lee, Y. H. Kim, and B.-S.Bae “A highly adhesive siloxane LED encapsulant optimized for high thermal stability and optical efficiency”, Journal of Materials Chemistry C, 4 10791-10796 (2016)
+These authors contributed equally
PDF
227. S.-Y.Kim, K. Kim, Y. H. Hwang, J. Park, J. Jang, Y. Nam, Y. Kang, M. Kim, H. J. Park, Z. Lee, J. Choi, Y. Kim, S. Jeong, B.-S. Bae, and J.-U. Park “High-resolution electrohydrodynamic inkjet printing of stretchable metal oxide semiconductor transistors with high performance”, Nanoscale, 8 17113-17121 (2016) PDF
226. J. Jang, H.-G. Im, J. Jin, J. Lee, J.-Y. Lee, and B.-S. Bae “A Flexible and Robust Transparent Conducting Electrode Platform Using an Electroplated Silver Grid/Surface-Embedded Silver Nanowire Hybrid Structure”, ACS Applied Materials & Interfaces, 8 27035-27043 (2016) PDF
225. H. Park, K. R. Yoon, S. K. Kim, I.-D. Kim, J. Jin, Y. H. Kim, and B.-S. Bae “Highly Conducting In2O3 Nanowire Network with Passivating ZrO2 Thin Film for Solution-Processed Field Effect Transistors”, Advanced Electronic Materials, 2 1600218 (2016) PDF
224. Y. Y. Kim, J. J. Park, S. J. Ye, W. J. Hyun, H.-G. Im, B.-S. Bae, and O. O. Park “Novel microlens arrays with embedded Al2O3 nanoparticles for enhancing efficiency and stability of flexible polymer light-emitting diodes”, RSC Advances, 6 65450 (2016) PDF
223. H.-G. Im+, S. Jeong+, J. Jin, J. Lee, D.-Y. Youn, W.-T. Koo, S.-B. Kang, H.-J. Kim, J. Jang, D. Lee, H.-K. Kim, I.-D. Kim, J.-Y. Lee, and B.-S. Bae “Hybrid Crystalline-ITO/Metal Nanowire Mesh Transparent Electrodes and their Application for Highly Flexible Perovskite Solar Cells”, NPG Asia Materials, 8 e282 (2016)
+These authors contributed equally
PDF
222. J. Jin+, D. Lee+, H.-G. Im, Y. C. Han, E. G. Jeong, M. Rolandi, K. C. Choi and B.-S. Bae “Chitin Nanofiber Transparent Paper for Flexible Green Electronics”, Advanced Materials (Cover paper), 28 5169-5175 (2016)
+These authors contributed equally
PDF
221. Y. C. Han, E. G. Jeong, H. C. Kim, S. I. Kwon, H.-G. Im, B.-S.Bae, and K. C. Choi “Reliable Thin-film Encapsulation of Flexible OLEDs and Enhancing their Bending Characteristics through Mechanical Analysis”, RSC Advances, 6 40835-40843 (2016) PDF
220. E. G. Jeong, Y. C. Han, H.-G. Im, B.-S. Bae, K. C. Choi “Highly Reliable Hybrid Nano-stratified Moisture Barrier for Encapsulating Flexible OLEDs”, Organic Electronics, 33 150-155 (2016) PDF
219. J. Park, C. S. Kim, Y. S. Kim, Y. C. Park, H. J. Park, B.-S. Bae, J.-S. Park, and H.-S. Kim “The Effect of ITO and Mo Electrodes on the Properties and Stability of In-Ga-Zn-O Thin Film Transistors”, Journal of Electroceramics, 36 129-134 (2016) PDF
218. D. H. Kim, H. J. Park and B.-S. Bae “Highly improved photo-induced bias stability of sandwiched triple layer structure in sol-gel processed fluorine-doped indium zinc oxide thin film transistor”, AIP Advances, 6 035315 (2016) PDF
217. Y. H. Kim, Y.-W. Lim, Y. H. Kim and B.-S. Bae “Thermally Stable Siloxane Hybrid Matrix with Low Dielectric Loss for Copper-Clad Laminates for High-frequency Applications”, ACS Applied Materials & Interfaces, 8 8335-8340 (2016) PDF
216. J.-Y. Bae, H.-W. Kim, Y.-W. Lim, Y. H. Kim and B.-S. Bae “Optically Recoverable, Deep Ultraviolet (UV) Stable and Transparent Sol-Gel Fluoro Siloxane Hybrid Material for UV LED Encapsulant”, RSC advances, 6 26826-26834 (2016) PDF
215. H.-G. Im+, B. W. Ahn+, J. Jin, J. Jang, Y.-G. Park, J. U. Park and B.-S. Bae “High-Performance, Flexible and Robust Metal Nanotrough-Embedded Transparent Conducting Film for Wearable Touch Screen Panels”, Nanoscale, 8 3916-3922 (2016)
+These authors contributed equally
PDF
214. S. H. Choi, S.-J. Seo, D. Zhao, K.-T. Park, B. S. Kim, T.-S. Kim and B.-S. Bae “Enhanced Luminescence Characteristics of Mesophase Silica Thin Films Doped with In-Situ-Formed Rare Earth Complexes”, Science of Advanced Materials, 8 122-127 (2016)

sub_bulet 2015
213. H. J. Park+, Y. Y. Nam+, J. Jin, and B.-S. Bae “Space Charge-Induced Unusually-High Mobility of Solution-Processed Indium Oxide Thin Film Transistor with Ethylene Glycol Incorporated Aluminum Oxide Gate Dielectric”, RSC Advances , 5 102362-102366 (2015)
+These authors contributed equally
PDF
212. J. H. Kown, E. T. Kim, H.-G. Im, B.-S. Bae, K. S. Chang, S.-H Ko Park, and K. C. Choi “Metal-Containing Thin-Film Encapsulation with Flexibility and Heat Transfer”, Journal of Information Display , 16(2) 123-128 (2015) PDF
211. J. Kim, S. H. Song, H.-G. Im, G. Yoon, D. Lee, C. Choi, J. Kim, B.-S. Bae, K. Kang and S. Jeon “Moisture Barrier Composites Made of Non-Oxidized Graphene Flakes”, Small , 11(26) 3124-3129 (2015) PDF
210. H. Y. Kim, J. Jin, S. H. Ko Park, I. Y. Eom and B.-S. Bae “350° C processable low-CTE transparent glass-fabric-reinforced hybrimer film for flexible substrates”, Journal of Information Display, 16(1) 57-64 (2015) PDF
209. J.-Y. Bae, Y. H. Kim, H. Y. Kim, Y. B. Kim, J. Jin, and B.-S. Bae “Ultraviolet Light Stable and Transparent Sol-gel Methyl Siloxane Hybrid Material for UV Light Emitting Diode (UV LED) Encapsulant”, ACS Applied Materials & Interfaces, 14(11) 6322-6328 (2015) PDF
208. B. W. AN, B. G. Hyun, S. Y. Kim, M. Kim, M. S. Lee, K. Lee, J. B. Koo, H. Y. Chu, B.-S Bae and J. U. Park “Stretchable and Transparent Electrodes using Hybrid Structures of Graphene-Metal Nanotrough Networks with High Performances and Ultimate Uniformity”, Nano letters, 7(2) 1035-1039 (2015) PDF

sub_bulet 2014
207. H.-G. Im, S.-H. Jung, J.H. Jin, D. Lee, J.-Y. Lee, I.-D. Kim, and B.-S. Bae “Flexible Transparent Conducting Hybrid Film Using Surface-Embedded Copper Nanowire Network: A Highly Oxidation-Resistant Copper Nanowire Electrode for Flexible Optoelectronics”, ACS Nano, 8(10) 10973-10979 (2014) PDF
206. J.-S. Seo, and B.-S Bae “Improved Electrical Performance and Bias Stability of Solution-Processed Active Bilayer Structure of Indium Zinc Oxide based TFT”, ACS Applied Materials & Interfaces , 6 15335-15343 (2014) PDF
205. H. J. Park+, Y. Y. Nam+, J. Jin, and B.-S. Bae “Improvement of bias stability of oxyanion-incorporated aqueous sol-gel processed indium zinc oxide TFTs”, Journal of Materials Chemistry C, 2 5998-6003 (2014)
+These authors contributed equally
PDF
204. Y. H. Kim, J.-Y. Bae, J. Jin, and B.-S. Bae “Sol-Gel derived transparent zirconium-phenyl siloxane hybrid for robust high refractive index LED encapsulant”, ACS Applied Materials & Interfaces, 6 3115-3121 (2014) PDF
203. H.-G. Im, J. Jin, J.-H. Ko, J. Lee, J.-Y. Lee, and B.-S. Bae “Flexible transparent conducting composite films using a monolithically embedded AgNW electrode with robust performance stability”, Nanoscale, 6 711-715 (2014) PDF
202. H. Y. Kim, J.-Y. Bae, Y. H. Kim, and B.-S. Bae “Low Temperature Curable Epoxy Siloxane Hybrid Materials for LED Encapsulant”, Journal of Applied Polymer Science, 131 39968 (2014) PDF
201. J. M. Yun, S. H. Park, Y. H. Hwang, E. S. Lee, U. N. Maiti, H. U. Moon, B. H. Kim, B. S. Bae, Y. H. Kim, S. O. Kim “Complementary p- & n-Type Polymer Doping for Ambient Stable Graphene Inverter”, ACS Nano , 8 650 (2014) PDF

sub_bulet 2013
200. E.T. Kim, Y.C. Han, W.H. Kim, K.C. Choi, H.-G. Im, B.-S. Bae “Thin Film encapsulation for organic light emitting diodes using a multi-barrier composed of MgO prepared by atomic layer deposition and hybrid materials”, Organic Electronics, 14 1737-1743 (2013) PDF
199. J.-Y. Bae, Y. H. Kim, H.-Y. Kim, Y.-W. Lim, and B.-S Bae “Sol-Gel Synthesized Linear Oligosiloxane-Based Hybrid Material for a Thermally-Resistance Light Emitting Diode(LED) Encapsulant”, RSC Advances, 3 8871-8877 (2013) PDF
198. Y. H. Hwang, H.-G. Im, H. Park, Y.-Y. Nam, and B.-S Bae “The Effect of Metal Composition on Bias Stability of Solution Processed Indium Oxide Based Thin Film Transistors”, ECS Journal of Solid State Science and Technology, 2 Q200-Q204 (2013) PDF
197. J.-S. Seo, J.-H. Jeon, Y. H. Hwang, H. Park, M. Ryu, S.-H. K. Park, and B.-S. Bae “Solution-Processed Flexible Fluorine-doped Indium Zinc Oxide Thin-Film Transistors Fabricated on Plastic Film at Low Temperature”, Scientific Reports, 3 2085 (2013) PDF
196. Y. C. Han, E. Kim, W. Kim, H.-G. Im, B.-S. Bae, and K. C. Choi “A flexible moisture barrier comprised of a SiO2-embedded organic-inorganic hybrid nanocomposite and Al2O3 for thin-film encapsulation of OLEDs”, Organic Electronics, 14[6] 1436-1440 (2013) PDF
195. Y. H. Hwang and B.-S. Bae “Effect of Aluminum and Gallium Doping on the Performance of Solution-Processed Indium Oxide Thin-Film Transistors”, Jounal of Display Technology, 9 704 (2013) PDF
194. Y. H. Hwang, J.-S. Seo, J. M. Yun, H. Park, S. C. Yang, S.-H. K. Park, and B.-S. Bae “An ‘Aqueous Route’ for Low Temperature Processable Oxide Flexible Transparent Thin-Film Transistors on a Plastic Substrate”, NPG Asia Materials, 5 e45 (2013) PDF
193. J. H. Jin+, J. Lee+, S. C. Yang, J.-H. Ko, H.-G. Im, S.-W. Baek, J.-Y. Lee, and B.-S. Bae, “High-performance hybrid plastic films: a robust electrode platform for thin-film optoelectronics”, Energy & Environmental Science, 6 1881 (2013)
+These authors contributed equally
PDF
192. S. Y. Kwak, S. C, Yang, N. R. Kim, J. H. Kim, and B.-S. Bae, “Sol-gel derived dye-bridged hybrid materials for white luminescence”, Journal of Sol-Gel Science and Technology, 65[1] 46-51 (2013) PDF
191. H. Park, Y. H. Hwang, and B.-S. Bae, “Sol-gel processed Cu2ZnSnS4 thin films for a photovoltaic absorber layer without sulfurization”, Journal of Sol-Gel Science and Technology, 65[1] 23-27 (2013) PDF

sub_bulet 2012
190. M.-S. Kim, Y. H. Hwang, S. Kim, Z. Guo, D.-I. Moon, J.-M. Choi, M.-L. Seol, B.-S. Bae, and Y.-K. Choi “Effects of the oxygen vacancy concentration in InGaZnO-based resistance random access memory”, Applied Physics Letters, 101 243503 (2012) PDF
189. S.-Y. Kwak, N. R. Kim, J. H. Kim, and B.-S. Bae “High color rendering white light-emitting diodes based on a green silicate phosphor mixed with a red dye-bridged hybrid”, RSC Advances, 2 (32) 12371-12377 (2012). PDF
188. J.-S. Kim, Y. H. Kim, J. H. Ko and B.-S. Bae “Thiol-ene Reaction Derived Sol-Gel Hybrid Dielectric Layer for Organic Thin Film Transistors”, ECS Transactions, 50(4) 83-88 (2012)
187. B.-S. Bae, Y. H. Hwang, J.-S. Seo, and G.-M. Choi “Simple Aqueous Solution Route for Fabrication High Performance Oxide TFT”, ECS Transactions, (2012)
186. B.-S. Bae, S.-Y. Kwak, N.-R. Kim, H.-G. Im “High Color Rendering White LED Based on Silicate/Dye-Bridged Siloxane Hybrid Phosphor Encapsulant”, ECS Transactions, 50(4) 83-88 (2012)
185. J.-S. Seo, J.-H. Jeon, Y. H. Hwang, M. K. Ryu, S.-H. K. Park, and B.-S. Bae “Novel Aqueous Solution Processed Fluorine-doped Indium Zinc Oxide (F-IZO) Thin-Film Transistors Fabricated at 200℃”, IMID Proc., 14-2(2012) PDF
184. Y. H. Hwang, J.-S. Seo, Y. Y. Nam, M. K. Ryu, S.-H. K. Park, and B.-S. Bae “Low Temperature Fabrication of Aqueous Solution Processed Flexible Indium Oxide Transparent Thin-Film Transistors on a Plastic Substrate”, IMID Proc., P2-14(2012)
183. S.-Y. Kwak, N. R. Kim, and B.-S. Bae “High Color Rendering White LED Based on Dye-Bridged Siloxane Hybrid Encapsulation Mixed with Silicate Phosphor”, IMID Proc., 44-2(2012) PDF
182. D. Zhao, H. Chen, H. Li, S.-J. Seo, B.-S. Bae, W. Qin “High luminescence quantum efficiency of green mesophase silicate thin film incorporated with rare earth complex”, Materials Chemistry and Physics, 134(1) 50-53 (2012) PDF
181. S. C. Yang, J. H. Jin, S.-Y. Kwak, and B.-S. Bae, “Photo-Curable Transparent Cyclo-Aliphatic Epoxy Hybrid Materials Cross-linked by Oxetane”, Journal of Applied Polymer Science, 126, E380-E386 (2012). PDF
180. J.-Y. Bae, D.S. Lim, H.-G. Yun, M. Kim, J. H. Jin, and B.-S. Bae “A quasi-solid-state dye-sensitized solar cell based on sol-gel derived in situ gelation of a siloxane hybrid electrolyte”, RSC Advances, 2, 5524-5527 (2012) PDF
179. S.-Y. Kwak, N. R. Kim, and B.-S. Bae “Dye-Bridged Hybrid Materials for Robust and High-Performance Wavelength Converter of White LEDs”, SID 2012 DIGEST, P-68, 1314 (2012) PDF
178. J. S. Kim, K. Wubs, B.-S. Bae, and W. S. Kim “Direct stamping of silver nanoparticles toward residue-free thick electrode”, Science and Technology of Advanced Materials, 13(3), 035004 (2012) PDF
177. J. M. Yoon, D. O. Shin, H. K. Seo, D.-W. Kim, Y. I. Kim, J. H. Jin, Y. T. Kim, B.-S. Bae, S. O. Kim, and J. Y. Lee “Fabrication of High-desity In3Sb1Te2 phase change nanoarray on glass-fabric reinforced flexible substrate”, Nanotechnology, 23, 255301 (2012) PDF
176. S. C. Yang, S. Y. Kwak, J. H. Jin, J. S. Kim, Y. W. Choi, K.-W. Paik and B.-S. Bae, “Thermally Resistant UV-Curable Epoxy-Siloxane Hybrid Materials for Light Emitting Diode (LED) Encapsulation”, Journal of Materials Chemistry, 22(18), 8874-8880 (2012) PDF
175. J. S. Kim, S. C. Yang, S. Y. Kwak, Y. W. Choi, K.-W. Paik and B.-S. Bae, “High Performance Encapsulant for Light-Emitting Diodes (LEDs) by a Sol-Gel derived Hydrogen Siloxane Hybrid”, Journal of Materials Chemistry, 22(16), 7954-7960 (2012) PDF
174. J. H. Jeon, Y. H. Hwang, J. H. Jin, and B.-S. Bae, “Low-temperature aqueous solution processed fluorine-doped zinc tin oxide thin-film transistors”, MRS Communication, 2, pp. 17-22 (2012) PDF
173. J. S. Kim, S. Lee, Y. H. Hwang, Y. H. Kim, S. H. Yoo, and B.-S. Bae, “Photo-Curable Sol-Gel Hybrid Film as a Dielectric Layer by a Thiol-ene Reaction in Air or N2 for Organic Thin Film Transistors”, Electrochemical and Solid-State Letters, 15(5), pp. G13-G15 (2012) PDF
172. J. H. Jeon, Y. H. Hwang, and B.-S. Bae, “Bias-Temperature-Illumination Stability of Aqueous Solution Processed Flourine Doped Zinc Tin Oxide (ZTO:F) Transistor”, >Electrochemical and Solid-State Letters, 15(4), pp. H123-H125 (2012) PDF
171. Y. H. Hwang, S. J. Seo, J. H. Jeon, and B.-S. Bae, “Ultraviolet Photo-Annealing Process for Low Temperature Processed Sol-Gel Zinc Tin Oxide Thin Film Transistors”, >Electrochemical and Solid-State Letters, 15(4), pp. H91-H93 (2012) PDF
170. J. H. Jin, S.C Yang, and B.-S. Bae, “Fabrication of a High Thermal-Stable Methacrylate-Silicate Hybrid Nanocomposite: Hydrolytic Vs. Non-hydrolytic Sol-Gel Synthesis of Methacryl-oligosiloxanes”, Journal of Sol-Gel Science and Technology, 61 (2), pp. 321-327 PDF
169. J. H. Jin, J. J. Lee, B.-S. Bae, S. J. Park, S. H. Yoo, and K.H. Jung, “Silica Nanoparticle-Embedded Sol-Gel Organic/Inorganic Hybrid Nanocomposite for Transparent OLED Encapsulation “, Organic Electronics, 13(1), pp53 – 57 (2012). PDF

sub_bulet 2011
168. H.G. Yun, B.-S. Bae, Y.S. Jun, and M.G. Kang, “Effective Methods for the High Efficiency Dye-Sensitized Solar Cells Based on the Metal Substrates (book chapter) “, Solar Cells – Dye-Sensitized Devices, Chap 12, pp267 – 278 (2011) PDF
167. K.J. Lee, J.H. Jin, B.-S. Bae, and R. Magnusson, “Guided-Mode Resonance Filters Fabricated with Soft Lithography (book chapter) “, Recent Advances in Nanofabrication Techniques and Applications, Chap 12, pp225 – 240 (2011). (2011). PDF
166. S.Y Kwak, S.C Yang, N.R Kim, J.H. Kim and B.-S. Bae, “Thermally Stable, Dye-Bridged Nanohybrid-Based White Light-Emitting Diodes “, Advanced Materials (Cover Paper), 23, pp5767-5772 (2011). PDF
165. S.-J. Seo, J. H. Jeon, Y.H. Hwang and B.-S. Bae, “Improved Negative Bias Iilumination Instability of Sol-gel Gallium Zinc Tin Oxide Thin Film Transistors “, Applied Physics Letters, 99, pp152102-1 – 152102-3 (2011) PDF
164. S.Y Kwak, N.R Kim, K. Lee, J. Yi, J.H. Kim and B.-S. Bae, “Enhancement of Fluorescence and Lasing Properties of Covalent Bridged Fluorescent Dye in Organic-inorganic Hybrid Materials “, Journal of Sol-gel Science and Technology, 60, pp137-143 (2011). PDF
163. S. Park, K.H Jung, C. Yun, H. Cho, B.-S. Bae, and S. Yoo, “Improved Lifetime of Highly Flexible OLEDs Based on Multilayered Transparent Electrodes with Enhanced Barrier Performance “, Journal of the Society for Information Display, 19(9), pp597-601 (2011) PDF
162. S.-J.Seo, S.C Yang, J.H. Ko and B.-S. Bae, “Effects of Sol-Gel Organic-Inorganic Hybrid Passivation on Stability of Solution-Processed Zinc Tin Oxide Thin Film Transistors “, Electrochemical and Solid-State Letters, 14(9), H375-H379 (2011) PDF
161. S.C Yang, J.H Jin, S.Y Kwak and B.-S. Bae, “Thermo-Mechanical/Thermal Properties of Photo-Cationic Polymerized Cyclos-Aliphatic Epoxy Hybrid Materials “, Macromolecular Research, 19(11), pp1166-1171 (2011). PDF
160. S.C Yang, J.S Kim, J.H Jin, S.Y Kwak and B.-S. Bae, “Cycloaliphatic Epoxy Oligosiloxane-Derived Hybrid Materials for a High-Refractive Index LED Encapsulant “, Journal of Applied Polymer Science, 122[4], pp2478-2485 (2011). PDF
159. J.S Kim, S.C Yang, H. Park and B.-S. Bae, “Photo-Curable Siloxane Hybrid Material Fabricated by Thiol-Ene Reaction of Sol-Gel Synthesized Oligosiloxanes “, Chemical Communications, 47(21), pp6051-6053 (2011). PDF
158. Y.H Hwang, J. H Jeon and B.-S. Bae, “Post-Humid Annealing of Low-Temperature Solution-Processed Indium Based Metal Oxide TFTs “, Electrochemical and Solid-State Letters, 14(7), ppH303-H305 (2011). PDF
157. Y.-C Han, C. Jang, K.J. Kim, K.C. Choi, K.H. Jung, B.-S. Bae, “The encapsulation of an organic light-emitting diode using organic-inorganic hybrid materials and MgO “, Organic Electronics, 12, pp609-613 (2011). PDF
156. H.-G. Yun, B.-S. Bae and M. G. Kang, “A simple and highly efficient method for surface treatment of Ti substrates for use in Dye-sensitized solar cells “, Advanced Energy Materials, 1[3], pp337-342 (2011). PDF
155. H.-G. Yun, J. H. Park, B.-S. Bae and M. G. Kang, “Dye-sensitized solar cells with TiO2 nano-particles on TiO2 nano-tube-grown Ti substrates “, Journal of Materials Chemistry, 21, pp3558-3561 (2011). PDF
154. K.H. Jung, J.-Y. Bae, H.-G. Yun, M.G. Kang and B. -S. Bae, “Novel Ionic Iodide-Siloxane Hybrid Electrolyte for Dye-Sensitized Solar Cells “, ACS Applied Materials and Interfaces, 3(2), pp293-298 (2011). PDF
153. J.Y. Bae, S. Yang, J. Jin, K.H. Jung, J.-S. Kim and B. -S. Bae, “Fabrication of transparent methacrylate zirconium siloxane hybrid materials using sol-gel synthesized oligosiloxane resin “, Journal of Sol-gel Science and Technology, 58[1], pp114-120 (2011). PDF
152. K.H. Jung, J.Y. Bae, S. J. Park, S. Yoo and B.-S. Bae, “High performance organic-inorganic hybrid barrier coating for encapsulation of OLEDs “, Journal of Materials Chemistry, 21, pp1977-1983 (2011). PDF
151. J. Jin, S. Yang, and B. -S. Bae, “Network Structure-Property Relationship in UV-cured Organic/Inorganic Hybrid Nanocomposites “, Polymer Chemistry, 2, pp168-174 (2011). PDF

sub_bulet 2010
150. S. Park, K.H. Jung, C. Yun, H. Cho, B.-S. Bae and S. Yoo, “Improved lifetime of highly flexible OLEDs based on multilayer transparent electrodes with enhanced barrier performance “, IDW Proc., (2010).
149. J. Jin, J.H. Ko, S.-J. Seo, Y.H. Hwang, S-H. K. Park, S. M. Yoon, M. K. Ryu, S. H. Yang, O.-S. Kwon, E.-S. Park and B.-S. Bae, “GReCoSS Process for Fabrication of Flexible Oxide TFT;, IMID Proc. (2010). PDF
148. J. H. Jeon, Y.H. Hwang, S.-J. Seo and B.-S. Bae, “Design of Optimized Solution Processed Oxide TFT Composition by Addition of Aluminum to Indium Tin Oxide”, IMID Proc., (2010). PDF
147. J. Jin, J. -H. Ko, S. Yang, and B. -S. Bae, “Rollable Transparent Glass-Fabric Reinforced Composite Substrate for Flexible Devices”, Advanced Materials (Cover paper), 22(40), 4510 (2010). PDF
146. S.-J.Seo, Y.H. Hwang and B.-S. Bae, “Postannealing Process for Low Temperature Processed Sol?GelZinc Tin Oxide Thin Film Transistors”, Electrochemical and Solid-State Letters, 13(10), H357 (2010). PDF
145. J. H. Jeon, Y. H. Hwang, B. S. Bae, H. L. Kwon, and H. J. Kang, “Addition of aluminum to solution processed conductive indium tin oxide thin film for an oxide thin film transistor”, Applied Physics Letters, 96, 212109 (2010). PDF
144. J.-S. Kim, S.C. Yang and B.-S. Bae, “Thermally Stable Transparent Sol-Gel Based Siloxane Hybrid Material with High Refractive Index for Light Emitting Diode (LED) Encapsulation”, Chemistry of Materials, 22, pp3549-3555 (2010). PDF
143. Y.H. Hwang, S.-J.Seo and B.-S. Bae, “Fabrication and characterization of sol-gel derived zinc oxide thin-film transistor”, Journal of Materials Research, 25[4], pp695-700 (2010). PDF
142. S.C. Yang, J.-S. Kim, J.H. Jin, S.-Y. Kwak, and B.-S. Bae, “Thermal resistance of cycloaliphatic epoxy hybrimer based on sol-gel derived oligosiloxane for LED encapsulation”, Journal of Applied Polymer Science, 117, pp2140-2145(2010). PDF
141. D. Zhao, S.-J.Seo, Zhang H, B.-S. Bae, Qin WP, “Synthesis of Well Dispersed Uniform Sub-4 nm Y2O3:Eu3+ Colloidal Nanocrystals”, Journal of Nanoscience and Nanotechnology. 10, pp2036-2039 (2010). PDF
140. J.-H. Oh, S.-Y. Kwak, S.-C. Yang, and B.-S. Bae, “Highly Condensed Fluorinated Methacrylate Hybrid Material for Transparent Low-k Passivation Layer in LCD-TFT”, ACS Applied Materials and Interfaces 2(3), pp913-918(2010). PDF
139. J.-H. Oh, S.-Y. Kwak, S.-C. Yang, and B.-S. Bae, “Highly Condensed Fluorinated Methacrylate Hybrid Material for Transparent Low-k Passivation Layer in LCD-TFT”, ACS Applied Materials and Interfaces 2(3), pp913-918(2010). PDF

sub_bulet 2009
138. H.S. Yoo, J.Y. Han, S.W. Kim, D.Y. Jeon, and B.-S. Bae, “Self-Assembled SiO2 Photonic Crystal Infiltrated by Ormosil:Eu(DBM)(3)phen Phosphor and its Enhanced Photoluminescence”, Optics Express, 17[5], pp3732-3740 (2009). PDF
137. Y.H. Hwang, J.H. Jeon, S.-J. Seo, and B.-S. Bae, “Low Temperature Annealed Sol-Gel Aluminum Indium Oxide Thin Film Transistors”, IMID Proc.,pp396-399 (2009). PDF
136. S.C. Yang, J.H. Oh, S.-Y. Kwak, and B.-S. Bae, “Transparent Sol-Gel Hybrid Dielectric Material Coatings for Low k Passivation Layer”, IMID Proc., pp1453-1456 (2009). PDF
135. K.H. Jung, C.H. Yun, J.-Y. Bae, S.H. Yoo, and B.-S. Bae, “High performance Organic-Inorganic Hybrid Materials for Application in OLED Barrier Coating”, IMID Proc., pp806-809 (2009). PDF
134. K.J. Lee, J.H. Jin, B.-S. Bae, and R. Magnusson, “Optical Filters Fabricated in Hybrimer Media with Soft Lithography”, Optics Letters, 34[16], pp2510-2512 (2009). PDF
133. S.C. Yang, S.-Y. Kwak, J.H. Jin, and B.-S. Bae, “Highly Condensed Epoxy-Oligosiloxane Based Hybrid Material for Transparent Low-k Dielectric Coating”, ACS Applied Materials and Interfaces, 1[7], pp1585-1590 (2009). PDF
132. Y.H. Hwang, J.H. Jeon, S.-J. Seo, and B.-S. Bae, “Solution-Processed, High Performance Aluminum Indium Oxide Thin-Film Transistors Fabricated at Low Temperature”, Electrochemical and Solid-State Letters, 12[9], H336-H339 (2009). PDF
131. C.G. Choi and B.-S. Bae, “Organic-inorganic hybrid gate dielectrics for low-voltage pentacene organic thin film transistors”, Synthetic Metals, 159[13], pp1288-1291 (2009). (highlighted as a front cover article) PDF
130. S.-Y. Kwak, C.G. Choi, and B.-S. Bae, “Effect of Surface Energy on Pentacene Growth and Characteristics of Organic Thin-Film Transistors “, Electrochemical and Solid-State Letters, 12[8], G37-G39 (2009). PDF
129. S.C. Yang, J.H. Kim, J.H. Jin, and B.-S. Bae, “Synthesis and Characterization of Nano-Sized Epoxy Oligosiloxanes for Fabrication of Transparent Nano Hybrid Materials”, Journal of Polymer Science B, 47[8], pp756-763 (2009). PDF
128. S.J. Seo, C.G. Choi, Y.H. Hwang, B.S. Bae, “High performance solution-processed amorphous zinc tin oxide thin film transistor”, Journal of Physics D: Applied Physics, 42[3], 035106 (2009). PDF

sub_bulet 2008
127. C.G. Choi and B.-S. Bae, “Photo-patternable titanium doped organic-inorganic hybrid gate dielectric in organic thin film transistors”, Journal of Nanoscience and Nanotechnology, 8[9], pp4679-4683 (2008). PDF
126. D.J. Kang and B.S. Bae, “Synthesis and Characterization of Sol–Gel Derived Highly Condensed
Fluorinated Methacryl Silica and Silica–Zirconia Hybrid Materials”, Journal of Non-Crystalline Solids, 354[46-46], pp4975-4980 (2008).
PDF
125. H.G. Yun, Y. Jun, J. Kim, B.S. Bae, M.G. Kang, “Effect of Increased Surface Area of Stainless Steel Substrates on the Efficiency of Dye-Sensitized Solar Cells”, Applied Physics Letters, 93[13], 133311 (2008). PDF
124. K.H. Jung, B.S. Bae, “Synthesis and Characterization of Photopatternable Epoxy Hybrid Materials for the Fabrication of Thick and Thermally Stable Microstructures with a High Aspect Ratio”, Journal of Applied Polymer Science, 108[5], pp3169-3176 (2008). PDF
123. B.S. Bae, J.H. Kim, J Ko, K.H. Jung, J.H. Jin, S.C Yang, S.W. Kim and D.Y. Jeon, “PDP Fabricated with Low-Temperature Processes Below 300℃ Using Sol-Gel Hybrid Polymers (Hybrimer PDP)”, SID Proc., pp1446-1449 (2008). PDF
122. S.J. Seo, C.G. Choi, Y.H. Hwang and B.S. Bae, “Transparent Amorphous Oxide Thin Film Transistors Fabricated by Solution Coating Process”, SID Proc., pp1254-1257 (2008). PDF
121. C.G. Choi, S.Y. Kwak and B.S. Bae, “Flexible Pentacene Organic Thin Film Transistors using Sol-Gel Hybrid Polymer Gate Dielectrics”, SID Proc., pp1239-1242 (2008). PDF
120. K.S. Suh, J.H. Shin, S.J. Seo and B.S. Bae, “Er3+ Luminescence and Cooperative Upconversion in ErxY2-xSiO5 Nanocrystal Aggregates Fabricated Using Si Nanowires”, Applied Physics Letters, 92[12], 121910 (2008). PDF
119. S.J. Seo, D. Zhao, K.S. Suh, J.H. Shin and B.S. Bae, “Synthesis and Luminescence Properties of Mesophase Silica Thin Films Doped with in-Situ Formed Europium Complex”, Journal of Luminescence, 128[4], pp565–572 (2008). PDF
118. C.G. Choi, S.J. Seo and B.S. Bae, “Solution-Processed Indium-Zinc Oxide Transparent Thin-Film Transistors”, Electrochemical and Solid-State Letters, 11[1], H7-H9 (2008). PDF

sub_bulet 2007
117. A. Moujoud, H.J. Kim, S.H. Kang, G.J. Oh, W.S. Kim, B.S. Bae, and S.Y. Shin, “Double Component Long Period Waveguide Grating Filter in Sol-Gel Material”, Optics Express, 15[23], pp15147-15153 (2007). PDF
116. C.G. Choi and B.S. Bae, “Effects of Hydroxyl Groups in Gate Dielectrics on the Hysteresis of Organic Thin Film Transistors”, Electrochemical and Solid-State Letters, 10[11], H347-H350 (2007). PDF
115. C.G. Choi and B.S. Bae, “Organic–Inorganic Hybrid Materials as Solution Processible Gate Insulator for Organic Thin Film Transistors”, Organic Electronics, 8[6], pp 743–748 (2007). PDF
114. D. Zhao, S.J. Seo and B.S. Bae, “Full-Color Mesophase Silicate Thin Film Phosphors Incorporated with Rare Earth Ions and Photosensitizers”, Advanced Materials, 19[21], pp3473-3479 (2007). PDF
113. D.J. Kang and B.S. Bae, “Photo-imageable Sol–Gel Hybrid Materials for Simple Fabrication of Micro-optical Elements”, Accounts of Chemical Research, 40[9], pp 903-912 (2007). PDF
112. D.J. Kang, B.S. Bae and J. Nishii, “Fabrication of Thermally Durable Sub-Wavelength Periodic Structures upon Inorganic-Organic Hybrid Materials by Nano-Imprinting”, Japanese Journal of Applied Physics, 46[6A], pp 3704-3709 (2007). PDF
111. W.S. Kim, M.G. Kim, J.H. Ahn, B.S. Bae, and C. B. Park, “Protein Micropatterning on Bifunctional Organic-Inorganic Sol-Gel Hybrid Materials”, Langmuir, 23[9], pp4732-4736 (2007). PDF
110. J.H. Kim, J.H. Ko and B.S. Bae, “Dispersion of Silica Nano-Particles in Sol-Gel Hybrid Resins for Fabrication of Multi-Scale Hybrid Nanocomposite”, Journal of Sol-Gel Science and Technology, 41[3], pp249-255 (2007). PDF
109. J.Y. Bae, J.I. Jung, S.J. Seo and B.S. Bae, “Formation and Thermal-Induced Changes of Mesostructures in Fluorinated Organosilicate Films”, Microporous and Mesoporous Materials, 98[1-3], pp283-291 (2007). PDF

sub_bulet ~2006
108. K.S. Suh, J.H. Shin, S.J. Seo and B.S. Bae, “Large-Scale Fabrication of Single-Phase Er2SiO5 Nanocrystal Aggregates Using Si Nanowires”, Applied Physics Letters, 89[22], pp 223102 (2006). PDF
107. J.Y. Bae, S.H. Choi and B.S. Bae, “Preparation and Optical Characterization of Mesoporous Silica Films with Different Pore Sizes”, Bulletin of the Korean Chemical Society, 27[10], pp1562-1566 (2006). PDF
106. D.J. Kang, J.P. Jeong and B.S. Bae, “Direct Photofabrication of Focal-Lengthcontrolled Microlens Array Using Photoinduced Migration Mechanisms of Photosensitive Sol-Gel Hybrid Materials”, Optics Express, 14[18], pp8347-8353 (2006). PDF
105. K.H. Nam, T.H. Lee, B.S. Bae and M. Popall, “Condensation Reaction of 3-(Methacryloxypropyl)-Trimethoxysilane and Diisobutylsilanediol in Non-Hydrolytic Sol-Gel Process”, Journal of Sol-Gel Science and Technology, 39[3], pp255-260 (2006). PDF
104. W.S. Kim, D.G. Choi and B.S. Bae, “Ultraviolet-Nanoimprint of 40 nm Scale Patterns Using Functionally Modified Fluorinated Hybrid Materials”, Nanotechnology, 17[13], pp 3319-3324 (2006). PDF
103. T.H. Lee, J.H. Kim and B.S. Bae, “Fabrication of Imide Hybrid Nanocomposites Using Amine Modified Oligosiloxanes Nanoclusters”, Polymeric Materials: Science & Engineering Preprints, 94, pp 551-552 (2006). PDF
102. T.H. Lee, J.H. Kim and B.S. Bae, “Synthesis of Colorless Imide-Hybrid Nanocomposites Using Amine Functionalized Oligosiloxanes Nano-building Clusters”, Journal of Materials Chemistry, 16[17], pp 1657-1664 (2006). PDF
101. A. Moujoud, W.S. Kim, B.S. Bae and S.Y. Shin, “Thermally Stable Optical Characteristics of Sol-Gel Hybrid Material Films”, Applied Physics Letters, 88[10], pp 101916 (2006). PDF
100. W.S. Kim, J.H. Jin and B.S. Bae, “Low Adhesive Force of Fluorinated Sol-gel Hybrid Materials for Easy De-moulding in a UV-based Nano-imprint Process”, Nanotechnology, 17, [5], pp 1212-1216 (2006). PDF
99. C.G. Choi, W.S. Kim and B.S Bae, “Low Dielectric Constant Organic-Inorganic Hybrid Materials by Non-Hydrolytic Sol-Gel Method”, Electronic Materials Letters, 1, pp 87-90 (2005). PDF
98. D.J. Kang, W.S. Kim and B.S. Bae, “Direct Photofabrication of Refractive-index-modulated Multimode Optical Waveguide Using Photosensitive Sol-gel Hybrid Materials”, Applied Physics Letters,87[22], 22106 (2005). PDF
97. K.B. Yoon, B.S. Bae and M. Popall, “FABRICATION OF LOW-LOSS WAVEGUIDES USING ORGANIC-INORGANIC HYBRID MATERIALS”, Journal of Nonlinear Optical Physics & Materials ,14, [3], pp399-407 (2005). PDF
96. J.K. Kim, D.J. Kang and B.S. Bae, “Wavelength-Dependent Photosensitivity in a Germanium-Doped Sol-Gel Hybrid Material for Direct Photopatterning”, Advanced Functional Materials, 15[11], pp1870-1876 (2005). PDF
95. W.S. Kim, K.B. Yoon and B.S. Bae, “Nanopatterning of Photonic Crystals with a Photocurable Silica-titania Organic-inorganic Hybrid Material by a UV-based Nanoimprint Technique”, Journal of Materials Chemistry, 15[42], pp4535-4539 (2005). PDF
94. D.G. Choi, J.H. Jeong, Y.S. Sim, E.S. Lee, W.S. Kim and B.S. Bae, “Fluorinated Organic-Inorganic Hybrid Mold as a New Stamp for Nanoimprint and Soft Lithography”, Langmuir, 21[21], pp9390-9392 (2005). PDF
93. K.S. Suh, O.H. Park, B.S. Bae, J.C. Lee, H.J. Choi, and J.H. Shin, “Optical Activation of Si Nanowires Using Er-Doped Sol-Gel Derived Silica”, MRS Symp. Proc., 832, pp F 10.5.1 ~ F 10.5.1 (2004). PDF
92. T.H. Lee, J.H. Kim, J.H. Ko and B.S. Bae, “Synthesis and Characterization of Imide-Oligosiloxanes Hybrid Nanocompisite (Imide HYBRIMER) by Reaction of Nano Amine Modified Oligosiloxane and Dianhydride”, MRS Symp. Proc., 847, pp EE8.8.1~ EE8.8.6 (2004). PDF
91. D.J. Kang, J.K. Kim and B.S. Bae, “Fabrication of Micro-Optical Devices by Holographic Interference of High Photosensitive Inorganic-Organic Hybrid Materials (Photo-HYBIRMER)”, MRS Symp. Proc., 846, pp DD 10.3.1 ~ DD 10.3.6 (2004). PDF
90. S.Y. Kim, S. Augustine, Y.J. Eo, B.S. Bae, S.I. Woo, and J.K. Kang, “Mechanism and Nanosize Products of the Sol-Gel Reaction Using Diphenylsilanediol and 3-Methacryloxypropyltrimethoxysilane as Precursors”, ” The Journal of Physical Chemistry: B, 109[19], pp9397-9403(2005). PDF
89. Y.J. Eo, T.H. Lee, S. Y. Kim, J.K. Kang, Y.S. Han and B.S. Bae, “Synthesis and Molecular Structure Analysis of Nano-Sized Methacryl-Grafted Polysiloxane Resin for Fabrication of Nano Hybrid Materials”, Journal of Polymer Science B, 43[7], 827-836 (2005). PDF
88. B.S. Bae, W.S. Kim and K.B. Yoon, “Fabrication of Zero Bending Loss Flexible Film Optical Waveguide by UV Moulding of Sol-Gel Hybrid Materials”, Integrated Photonics Research and Applications (IPRA) Proceedings, ITuA4, April 11-15, San Diego , USA (2005). PDF
87. Y.J. Eo, J.H. Kim, J.H. Ko, and B.S. Bae, “Optical Characteristic of Photo-Curable Methacryl -Oligosiloxane Nano Hybrid Thick Films” Journal of Materials Research, 20[2], pp401-408 (2005). PDF
86. K.S. Suh, J.H. Shin, O.H. Park, B.S. Bae, J.C. Lee, and H.J. Choi, “Optical Activation of Si Nanowires Using Er-Doped, Sol-Gel Derived Silica” Applied Physics Letters, 86[5], pp 053101 (2005). PDF
85. W.S. Kim, K.S Kim, Y.J. Eo, K.B. Yoon and B.S. Bae, “Synthesis of Fluorinated Hybrid Material for UV Embossing of a Large Core Optical Waveguide Structure” Journal of Materials Chemistry 15[4], pp465-469 (2005). PDF
84. J.H. Chang, C.H Shim, K. J. Kim and B.S. Bae, “Preparation of Mesoporous Silica using MPEG-b-PLA Diblock Copolymers with Controlled Pre Size at Room Temperature”, Journal of Industrial and Engineering Chemistry, 11(3)[1], pp471-474 (2005). PDF
83. W.S. Kim, K.S. Kim, Y.C. Kim and B.S. Bae, “Thermo-wetting Embossing Nano Imprinting of the Organic-inorganic Hybrid Materials”, Thin Solid Films, 476[1], pp181-184 (2005). PDF
82. D.J. Kang, P.V. Phong and B.S. Bae, “Fabrication of High-Efficiency Fresnel-Type Lenses by Pinhole Diffraction Imaging of Sol-Gel Hybrid Materials”, Applied Physics Letters, 85[19], pp4289-4291 (2004). PDF
81. S.Y. Seo, E. S. Kang, J. K. Lee, J. H. Shin and B. S. Bae, “The Thermo-Optic Effect of Si Nanocrystals in Silicon-Rich Silicon Oxide Thin Films”, Applied Physics Letters., 85[13], pp2526-2528 (2004). PDF
80. E.S. Kang, W.S. Kim, K.S. Kim and B.S. Bae, “Modification of Thermo-Optic Characteristics of Sol-Gel Inorganic-Organic Hybrid Materials”, Journal of Sol-Gel Science and Technology, 32[1-3], pp277-280 (2004). PDF
79. O.H. Park , J. Pinot and B.S. Bae, “Photoluminescence of Sol-Gel Hybrid Films Doped with Erbium Tris 8-Hydroxyquinoline”, Journal of Sol-Gel Science and Technology, 32, pp273-276 (2004). PDF
78. B.S. Bae, “High Photosensitive Sol-Gel Hybrid Materials for Direct Photo-Imprinting of Micro-Optics”, Journal of Sol-Gel Science and Technology, 31[1-3], pp309-315 (2004). PDF
77. J.I. Jung, J.Y. Bae and B.S. Bae, “Preparation and Characterization of Structurally Stable Hexagonal and Cubic Mesoporous Silica Thin Films” Journal of Sol-Gel Science and Technology, 31[1-3], pp179-183 (2004). PDF
76. D.J. Kang, T.H. Lee and B.S. Bae, “Fabrication and Characteristics of Sol-Gel Derived Fluorinated Hybrid Material Films”, Journal of Sol-Gel Science and Technology, 31[1-3], pp113-116 (2004). PDF
75. Y.J. Eo, J.H. Kim, J.H. Ko and B.S. Bae, “Preperation and Characterization of Silica-Polymer Nano Hybrid Materials by Nonhydrolytic Sol-Gel Process” XX ICG’04 Proceedings, 20, P-11-046 (2004). PDF
74. W.S. Kim, J.K. Kim, Y.C. Kim and B.S. Bae, “Soft Lithography of Organic-Inorganic Hybrid Glasses for the Fabrication of Micro-Structure Devices” XX ICG’04 Proceedings, 20, 0-11-039 (2004). PDF
73. D.J. Kang, J.K. Kim, and B.S. Bae, “Simple Fabrication of Diffraction Gratings by Two-Beam Interference Method in Highly Photosensitive Hybrid Sol-Gel Films “, Optics Express 12 [17], pp3947-3953 (2004). PDF
72. E.S. Kang, W.S. Kim, D.J. Kim and B.S. Bae, “Reducing the Thermal Dependence of Silica-Based Arrayed-Waveguide Grating Using Inorganic-Organic Hybrid Materials”, IEEE Photonics Technology Letter, 16[12], pp2625-2627 (2004). PDF
71. J.Y. Bae, J.I. Jung and B.S. Bae, “Photochromism in Spiropyran Impregnated Fluorinated Mesoporous Organosilicate Films”, Journal of Materials Research, 19[8], pp2503-2509 (2004). PDF
70. J.I. Jung, J.Y. Bae and B.S. Bae, “Characterization and Mesostructure Control of Mesoporous Fluorinated Organosilicate Films”, Journal of Materials Chemistry, 14[13], pp1988-1994 (2004). PDF
69. O.H. Park, S.J. Kim and B.S. Bae, “Photochemical Reactions in Fluorinated Sol-Gel Hybrid Materials Doped with a Photolocking Agent for Direct Micropatterning”, Journal of Materials Chemistry, 14[11], pp1749-1753 (2004). PDF
68. W.S. Kim, J.H. Lee, S.Y. Shin, Y.C. Kim and B.S. Bae, “Fabrication of Ridge Waveguides by UV Embossing and Stamping of Sol-Gel Hybrid Materials”, IEEE Photonics Technology Letter, 16[8], pp1888-1890 (2004). PDF
67. W.S. Kim, R. Houbertz, T.H. Lee and B.S. Bae, “Effect of Photoinitiator on Photopolymeri- zation of Inorganic.Organic Hybrid Polymers (ORMOCER)”, Journal of Polymer Science B, 42, pp1979-1986 (2004). PDF
66. J.H. Jang, D.J. Kang, and B.S. Bae, “Large Photoinduced Densification in Organically Modified Germanosilicate Glasses”, Journal of American Ceramic Society, 87[1], pp155-158 (2004). PDF
65. J.Y. Bae, O.H. Park, J.I. Jung, K.T. Ranjit and B.S. Bae, “Photoionization of Methylphenothiazine and Photoluminescence of Erbium 8-Hydroxyquinolinate in Transparent Mesoporous Silica Films by Spin-Coating on Silicon” , Microporous and Mesoporous Materials, 67, pp265-271 (2004). PDF
64. J.H. Jang, D.J. Kang, and B.S. Bae, “Direct Photo-Imprinting in High Photosensitive Organically Modified Germanosilicate (ORMOGSIL) Glasses” MRS Symp. Proc., 780, pp Y5.10.1-Y5.10.6 (2003). PDF
63. J.U. Park , E.S. Kang, and B.S. Bae, “Photoinduced Low RefractiveIndex Patterning in a Photosensitive Hybrid Material” MRS Symp. Proc., 780, pp Y3.7.1-Y3.7.6 (2003). PDF
62. J.Y. Bae, J.I. Jung, O.H. Park, B.S. Bae, K.T. Ranjit and L. Kevan, “Synthesis and Characterization of Mesoporous Silica Films by Spin-Coating on Silicon: Photoionization of Methylphenothiazine and Photoluminiscenece of Erbium 8-Hydroxyquinolinate in Mesophorous Silica Films” , Studies in Surface Science and Catalysis, 146, pp65 -68 (2003). PDF
61. E.S. Kang, J.U. Park and B.S. Bae, “Effect of Organic Modifiers on the Thermo-Optic Characteristics of Inorganic-Organic Hybrid Material Films” Journal of Materials Research, 18 [8], pp1889-1894 (2003). PDF
60. O.H. Park, S.Y. Seo, J.I. Jung, J.Y. Bae and B.S. Bae, “Photoluminescence of Mesoporous Silica Films Impregnated with an Erbium Complex”, Journal of Materials Research, 18[5], pp1039-1042 (2003). PDF
59. J. Koo, E.S. Kang and B.S. Bae, “Formation and Optical Characteristics of Sol-Gel Derived Highly Oriented Ferroelectric (Sr,Ba)Nb2O6 Optical Waveguide Thin Films”, Journal of the Korean Physical Society, 42, ppS1161-S1164 (2003). PDF
58. D.J. Kang, J.U. Park, B.S. Bae, J. Nishii and K. Kintaka, “Single-Step Photo Patterning of Diffraction Gratings in Highly Photosensitive Hybrid Gel Films” , Optics Express ,11[10], pp1144-1148 (2003). PDF
57. S.Y. Seo, J.H. Shin, B.S. Bae, N. Park, J.J. Penninkhof and A. Polman, “Erbium-Thulium Interaction in Broadband Infrared Luminescent Silicon-Rich Silicon Oxide”, Applied Physics Letters, 82[20], pp3445-3447 (2003). PDF
56. O.H. Park, S.Y. Seo, J.H. Shin and B.S. Bae, “Indirect Excitation of Er3+ in Sol-Gel Hybrid Films Doped with an Erbium Complex”, Applied Physics Letters, 82[17], pp2787-2789 (2003). PDF
55. J.U. Park, W.S. Kim and B.S. Bae, “Photoinduced Low Refractive Index in a Photosensitive Organic-Inorganic Hybrid Material”, Journal of Materials Chemistry, 13[4], pp738-741 (2003). PDF
54. T.H. Lee, E.S. Kang and B.S. Bae “Catalytic Effects of Aluminum Butoxyethoxide in Sol-Gel Hybrid Hard Coatings” Journal of Sol-Gel Science and Technology , 27[1], pp23-29 (2003). PDF
53. E.S. Kang, J.Y. Bae and B.S. Bae, “Measurement of Thermo-Optic Coefficients in Sol-Gel Hybrid Glass Films” , Journal of Sol-Gel Science and Technology , 26[1-3], pp981-984 (2003). PDF
52. J.I. Jung, O.H. Park and B.S. Bae, “Fabrication of Channel Waveguides by Photochemical Self-Developing in Doped Sol-Gel Hybrid Glass”, Journal of Sol-Gel Science and Technology , 26[1-3], pp897-901 (2003). PDF
51. E.S. Kang, T.H. Lee and B.S. Bae, “Measurement of Thermo-Optic Coefficients in Sol-Gel Derived Inorganic-Organic Hybrid Material Films”, Applied Physics Letters, 81[8], pp1438~1440 (2002). PDF
50. B.S. Bae, O.H. Park , R. Charters, B. Luther-Davies and G. R. Atkins “Direct Laser Writing of Self-Developed Waveguides in Benzyl Dimethyl Ketal-Doped Sol-Gel Hybrid Glass”, Journal of Materials Research, 16[11], pp 3184-3187 (2001). PDF
49. B.S. Bae, O.H. Park , R. Charters, B. Luther-Davies and G. R. Atkins “Direct Laser Writing of Self-Developed Waveguides in Benzyl Dimethyl Ketal-Doped Sol-Gel Hybrid Glass”, Journal of Materials Research, 16[11], pp 3184-3187 (2001). PDF
48. J. Koo, J. H. Jang and B. S. Bae, “Preparation and Characteristics of Seeded Epitaxial (Sr,Ba)Nb2O2 Optical Waveguide Thin Films using Sol-Gel Method”, Journal of Materials Research, 16[2], pp430-436 (2001). PDF
47. B.S. Bae, J.I. Jung and O.H. Park , “Photochemical Self-Developing of Doped Sol-Gel Hybrid Glass Waveguides”, SPFE Proc, 4279, pp 101-108 (2001). PDF
46. J.Koo, E.S.Kang and J.H.Jang, “Nonlinear Optical Characteristics of Sol-Gel Derived Highly Oriented Ferroelectric Strontinum Barium Niobate Films”, SPFE Proc, 445316 , pp 191-199 (2001). PDF
45. H. Lee, I. Y. Kim, S.-S. Han, B.-S. Bae, M.K. Choi and I. S. Yang, “Spectroscopic Ellipsometry and Raman Study of Fluorinated Nanocrystalline Carbon Thin Films”, Journal of Applied Physics, 90[2], pp 813-818 (2001). PDF
44. S.S. Han and B.S. Bae, “Thermal Stability of Fluorinated Amorphous Carbon Thin Films with Low Dielectric Constant”, Journal of The Electrochemical Society, 148[4], pp F67-F72, (2001). PDF
43. J. Koo, J. H. Jang and B. S. Bae, “Crystallization Behavior of Sol-Gel-Derived Strontium Barium Niobate Thin Films”, Journal of American Ceramic Society, 84[1], pp193-199 (2001). PDF
42. J. Koo, J.H. Jang and B.S. Bae, “Optical and Electrical Properties of Ferroelectric SBN Thin Films Prepared by Sol-Gel Process”, Journal of Sol-Gel Science and Technology, 19[1-3], pp611-614 (2000). PDF
41. H.R. Kim, O.H. Park, Y.K. Choi and B.S. Bae, “Photobleaching of γ-Glycidoxypropyltrimethoxysilane-Chelated Metal Alkoxide Gel Films”, Journal of Sol-Gel Science and Technology, 19[1-3], pp607-610 (2000). PDF
40. J.H. Jang, J. Koo and B.S. Bae, “Fabrication and Ultraviolet Absorption of Sol-Gel Derived Germanium Oxide Glass Thin Films”, Journal of American Ceramic Society, 83[6], pp1356-1360 (2000). PDF
39. J. Koo, C. Lee, J.H. Jang, K. No and B.S. Bae, “Measurement of the Linear Electro-Optic Coefficients of Sol-Gel Derived Strontium Barium Niobate Thin Films Using Two-Beam Polarization Interferometer” , Applied Physics Letters, 76[19], pp2671-2673 (2000). PDF
38. J.H. Jang, J. Koo and B.S. Bae, “Photobleching of Sol-Gel Derived Germanium Oxide Glass Thin Films”, Journal of Materials Research, 15[2], pp282-284 (2000). PDF
37. H.J. Hong, J. Jung, A.Y. Jeong, D.P. Kim and B.S. Bae, “Optical Absorption and Fluorescence of NADH Encapsulated Sol-Gel Silicate Gels”, The Korean Journal of Ceramics, 6[4], pp359-363 (2000). PDF
36. J.H. Jang, J. Koo and B.S. Bae, “Photosensitivity of Germanium Oxide and Germanosilicate Glass Sol-Gel Thin Films”, Journal of Non-Crystalline Solids, 259, pp144-148 (1999). PDF
35. O.H. Park, Y.J. Eo, Y.K. Chio and B.S. Bae, “Preparation and Optical Properties of Sililca-Poly(ethylene oxide) Hybrid Mateirlas”, Journal of Sol-Gel Science and Technology, 16[3], pp235-241 (1999). PDF
34. S.S. Han, H.R. Kim and B.S. Bae, “Depostion of Fluorinated Carbon Thin Films as an Low-Dielectric-Constant Material”, Journal of The Electrochemical Society, 146[9], pp3383-3388 (1999). PDF
33. J. Koo, J.H. Jang and B.S. Bae, “Highly Oriented (Pb,La)TiO3 Thin Films Prepared by Sol-Gel Process”, Journal of Materials Science, 34[20], pp5075-5080 (1999). PDF
32. B.H. Jun, J.S. Lee, D.W. Kim, T.H. Sung, B.S. Bae and K. No, “Composition, Oxidation, and Optical Properties of Fluorinated Silicon Nitride Film by Inductively Coupled Plasma Enhanced Chemical Vapor Deposition”, Journal of Materials Research, 14[3], pp995-1001 (1999). PDF
31. T.K. Kim, S.S. Han and B.S. Bae, “Optical and Electrical Properties of Amorphous Thin Films in GexTe1-x System”, Metals and Materials, 5[1], pp33-37 (1999).
30. O.H. Park , Y.J. Eo, Y.K. Choi and B.S. Bae, “Optical Characterization of Silica-PEO Hybrid Thin Film”, Organic/Inorganic Hybrid Material II MRS Symp. Proc., 576, pp445-450 (1999).
29. J. Koo, K. No and B.S. Bae, “Synthesis and Characterization of Highly Oriented Sol-Gel (Pb,La)TiO3 Thin Film Optical Waveguides”, Journal of Sol-Gel Science and Technology, 13[1-3], pp869-872 (1998). PDF
28. Y.J. Eo, D.J. Kim, B.S. Bae, K.C. Song, T.Y. Lee and S.E. Song, “Coating of TEOS/VTES Hybrid Solution on Polymer Films”, Journal of Sol-Gel Science and Technology, 13[1-3], pp409-413 (1998). PDF
27. D.S. Yoon, J. Koo, S.J. Kim, B.S. Bae, W.J. Lee, S.H.Cho and K. No, “Preparation and Waveguiding Properties of Sol-Gel Derived Lathanum Modified Lead Titanate Slab Waveguides”, Integrated Ferroelectrics, 20[1-4], pp141-158 (1998).
26. S.S. Han, B.H. Jun, K. No and B.S. Bae, “Preparation of a-SiNx Thin Film with Low Hydrogen Content by Inductively Coupled Plasma Enhanced Chemical Vapor Deposition (ICP-CVD)”, Journal of the Electrochemical Society 145[2], pp652-658 (1998). PDF
25. J. Koo, D.Y. Kim, B.S. Bae and S.I. Kwun, “Electro-Optic Characterization of Sol-Gel Derived (Pb,La)TiO3 Thin Films”, Journal of the Korean Physical Society, 32, pp.S1431-S1433 (1998).
24. B.H. Jun, S.S. Han, J.S. Lee, Y.B. Kim, H.Y. Kang, Y.B. Koh, Z-T. Jiang, B.S. Bae and K. No, “Fluorinated Silicon Nitride Film for the Bottom Antireflective Layer in Quarter Micron Optical Lithography”, Semiconductor Science & Technology, 12, pp921-926 (1997). PDF
23. J. Koo, B.S. Bae and H.K. Na, “Raman Spectroscopy of Copper Phosphate Glasses”, Journal of Non-crystalline Solids, 212, pp173-179 (1997). PDF
22. S. Hong, E. Kim, Z-T. Jiang, B.S. Bae, K. No, S.C. Lim, S.G. Woo and Y.B. Koh, “Effects of Gas Ring Position and Thickness Uniformity”, Material Science & Engineering: B, 45[1-3], pp98-101 (1997). PDF
21. J. Koo, S.U. Kim, D.S. Yoon, K. No and B.S. Bae, “Effect of Heat Treatment on Formation of Sol-Gel (Pb,La)TiO3 Films for Optical Application”, Journal of Material Research, 12[3], pp812-818 (1997).
20. Z.T. Jang, S. Hong, E. Kim, B.S. Bae, S. Lim, S.G. Woo, Y.B. Koh and K. No, “Single-Layer Halflife Phase-shifting Masks for DUV Microlithography : Optical Simulation and Chromium Compound Film Preparation”, Applied Surface Science, 114, pp680-684 (1997). PDF
19. B.H. Jun, S.S. Han, K.S. Kim, J.S. Lee, Z-T. Jiang, B.S. Bae and K. No, “Titanium Oxide Film for Bottom Antireflective Layer in Deep Ultraviolet Lithography”, Applied Optics, 36[7], pp1482-1486 (1997). PDF
18. J. Koo, C. Lee, K. No and B.S. Bae, “Epitaxial Growth and Optical Properties of Sol-Gel (Pb,La)TiO3 Thin Films for Waveguides”, Epitaxial Oxide Thin Films III, MRS Symp. Proc., 474, pp61-66 (1997).
17. S.S. Han, B.H. Jun, K. No and B.S. Bae, “Characterization of a-SiNx Thin Film Deposited by Inductively Coupled Plasma Enhanced Chemical Vapor Deposition”, MRS Symp. Proc., 446, pp139-144 (1997).
16. B.H. Jun, S.S. Han, D.W. Kim, H.Y. Kang, Y.B. Koh, B.S. Bae and K. No, “The Applicability of Fluorinated Silicon Nitride Film as Bottom Antireflective Layer in Deep Ultraviolet Lithography”, MRS Symp. Proc., 446, pp115-120 (1997).
15. S. Hong, E. Kim, B.S. Bae, K. No, S.C. Lim, S.G. Woo and Y.B. Koh, “A Simulation Model for Thickness Profile of the Film Deposited Using Planar Circular Type Magnetron Sputtering Sources”, Journal of Vacuum Science & Technology A, 14[5], pp2721-2727 (1996). PDF
14. Z-T. Jiang, S. Hong, E. Kim, B.S. Bae, K. No, C.K. Hwangbo, S.C. Lim, S.G. Woo and Y.B. Koh, “Optical Property Simulation of Single-Layer Halftone Phaseshifting Masks for DUV microlithography”, Semiconductor Science & Technology, 11, pp1450-1455 (1996). PDF
13. D.J Kim, B.S. Bae and H. Kim, “Effect of Zirconia Mixing Route on Densification of Alumina Reinforced with Silicon Carbide Whiskers”, Advances in Ceramic-Matrix Composites Ⅲ, Ceramic Transactions, 74, pp311-317 (1996).
12. J. Koo, S.S. Han and B.S. Bae, “Fabrication and Characterization of Sol-Gel Ternary Titanium Silicate Waveguides”, The Korean Journal of Ceramics, 2[2], pp89-94 (1996).
11. S. Hong, E. Kim, Z-T. Jiang , S.C. Lim, S.G. Woo, Y.B. Koh, B.S. Bae and K. No, “Investigation on Applicability of Chromium-based Materials to Attenuated Phase Shift Mask for DUV Exposure”, SPIE Proceeding, 2793, pp134-137 (1996).
10. K. No, C.J. Kim, D.S. Yoon, J.S. Lee, C.G. Choi, W.J. Lee and B.S. Bae, “Texturing and Electrical Characteristics of Sol-Gel Derived Ferroelectric Thin Films”, Integrated Ferroelectrics, 9[1-3], pp159-168 (1995).
9. D.S. Yoon, S.W. Kim, J. Koo, Z-T. Jiang, B.S. Bae, W.J. Lee, K.S. No and S.H. Cho, “Effects of Drying Temperature on the Optical Properties of Solution Derived (Pb, La)TiO3 Thin Films”, The Korean Journal of Ceramics, 1[4], pp191-196 (1995).
8. B.S. Bae, J. Koo and D.H. Kim, “Thermal Properties of Copper Phosphate Glasses”, Proceeding of SEAS’95, pp12-15 (1995).
7. B.S. Bae, W.J. Lee, K. No, D.S. Yoon and S.U. Kim, “Optical Properties of Sol-Gel PLT Thin Films for Waveguide Application” Thin Films for Integrated Optics Applications, MRS Symp. Proc., 392, pp279-285 (1995).
6. B.S. Bae and M.C. Weinberg, “Chemical Durability of Copper Phosphate Glasses”,Glass Technology, 35[2], pp83-88 (1994).
5. B.S. Bae and M.C. Weinberg, “Optical Absorption of Copper Phosphate Glasses in the Visible Spectrum”, Journal of Non-Crystalline Solids, 168, pp223-231 (1994). PDF
4. B.S. Bae and M.C. Weinberg, “UV Optical Absorptions of Semiconducting Copper Phosphate Glasses”, Journal of Applied Physics, 73[11], 1, pp7760-7766 (1993). PDF
3. B.S. Bae and M.C. Weinberg, “Crystallization of Copper Metaphosphate Glass”, Journal of the American Ceramic Society, 76[6], pp1395-1400 (1993).
2. B.S. Bae and M.C. Weinberg, “Crystallization of Copper Metaphosphate Glass”, Journal of the American Ceramic Society, 76[6], pp1395-1400 (1993).
1. B.S. Bae and M.C. Weinberg, “Crystallization of Copper Metaphosphate Glass”, Journal of the American Ceramic Society, 76[6], pp1395-1400 (1993).
top